|
 Cylindrical Grinding
Attachment
|
|
- used in cylindrical grinding or
cylindrical tapering grinding and in outer surface grinding of various tools.
For grinding material with diameter of above 50
mm, Variable Speed workhead is recommended. |
|
Internal Grinding
Attachment
|
|
-
Used in combination with cylindrical grinding Att, and variable
speed Workhead
- Suitable for inner diameter tapering
grinding
- Head stock rotation speed : 20,000 r.p.m
- Maximum grinding
length : 75 mm
- Grinding diameter : 12~50 mm |
|
Variable Speed
workhead
|
|
- Suitable for cylindrical grinding by
reamer, centering
machine, tapping machine and mandrel, drill
- Tail stock
for heavy duty grinding is also supplied
- Head stock speed (3 speeds) :
120, 200, 325 r.p.m.
- Motor capacity : 0.2 kw |
|
Wet Grinding Attachment
|
|
|
- Used
cylindrical grinding, internal grinding
and surface grinding
|
|
Spring Collet Chuck
(ER-collect chuck)
|
|
|
- Is attached
directly to the Workhead
- Is
required for small cutter grinding
-
Dimension : 3, 4, 6, 8, 12, 16 and 20 mm
|
|
Radius
Grinding Attachment
|
|
|
-
Suitable for Ball End Mill grinding and
stylus radius grinding
-
Composed of two slide bases with a micrometer
and a workhead
- In addition,
deviding plate attached to the rear, provides
easy
working
of straight flutes cutters
-
Grinding or working radius : 0~100 mm
- Head stock taper : MT No.5
( B&S No.12 )
|
|
Helical
Grinding Attachment
|
|
|
_
Useful in grinding of spiral cutter gradient,
hob, or straight tooth
profile
of End Mill, and Center Drill
-
Suitable in grinding of outer angle of relief
and gradient
- Head stock
taper : MT No.4 ( B&S No.10
)
- Lead : 0 ~ ¡Ä
- Maxmum speed of head
stock : 2 revolution
- Maxmum
diameter of grinding : 125 mm
-
Maxmum length of grinding : 370 mm
-
Module (Hob) : Max 8
_ Helix
(Hob) : ±8°
|
|
Dust
Collector
|
|
|
-
Collects fine metal particles generated
during grinding process
-
Required to maintain the accuracy of the
machine as well as worker's
health
- Motor capacity
: 0.75 kw (1 Hp) or 1.5 kw (2 Hp)
|
|
Surface
Grinding Attachment
|
|
|
-
Universal vice useful for the surface grinding
and the grinding
of tool end
-
Equipped with an additional supporting bar
which provides 360° rotation of
the grinding material
-
Effectively used in combination with extended
grinding wheel spindle
-
Width of vice : 100 mm
-
Depth : 25 mm
- Maxmum interval
of jaw : 70 mm
|
|
Extended
Grinding Wheel Spindle
|
|
|
-
Used in grinding requiring more accuracy
than that with standard shaft and
in hard grinding
- Easily
exchangeable cartridge type
-
Extended length : 80 mm
|
|
Workhead
Indexing Attachment
|
|
|
-
Attached to the standard workhead for the
rapid and accurate
indexing
operation
- Indexing number
: 24 ( 20, 36, 48 )
|
|
Sand
Blast
|
|
|
-
Used in spreading sand on the surface of
grinding material
to
remove debris
|
|
Drill
Grinding Attachment
|
|
|
- Used
in grinding variable Drill with ER-collect
|
|
Gun
drill Grinding Attachment
|
|
|
|
|
Small
Workhead Attachment
|
|
|
|
